DFW Christmas Lights (214) 257-8155

By Maria Bargellini, holiday lighting designer for DFW Christmas Lights

Icicle drop lights are fairly new and have been used mostly for large commercial holiday lighting displays – until now. Icicle drop lights are designed to give off the appearance of falling snow by using the LED lights (diodes) in the tube to “drip” down the length of the tube repeated. They look great in trees or over your entryway, breezeway or any type of archway. The tubes come in a variety of lengths and combinations. For example, you can get a 5 tube strand in 10 or 20 inches, a mixed strand of  (3)-20 inch tubes and (2) 40″ tubes, or (5) 40 inch tubes. The best tree displays will use a mixture of these strands. Make sure to use the shorter icicle drop lights if you are using them in an area where there is pedestrian or vehicle traffic. For a striking upgrade you can add colored light to the trunk of the tree like in the video below.

(The icicle lights are toward the end on the next video)

These LED Christmas lights may be more expensive than incandescent mini lights but you don’t need any where near as many mini lights as you would icicle drop lights, you definately wouldn’t use as much energy, and they surely don’t take as much labor to install or take up as much space in your storage room. So in terms of what the two different displays will cost – they should be about equal. Of course it will depend on the type and amount of mini lights you were using, it can in some cases be less or more expensive.

Icicle drop lights are also a great way to add movement to your holiday lighting display without making it look to busy or like the Griswalds, not that there’s anything wrong with the kind of thing, if you’re into it. If  you would like more information or have questions about this product please feel free to write or call us at 214-257-8813.

Icicle Drop Light Pros

You can add up to 10 sets together

Use less Storage space

Use less energy

Less effort to install

Low profile disappears during the day

Not your grandmas Christmas Lights

Icicle Light Cons

More expensive than other lighting options

Only comes in the pure white color

Related Articles    Stars and star burst Christmas decorating tool

DFW Christmas Lights, The Outdoor Lighting Expert, and Lawn Sprinklers Dallas are sites owned and operated by Dallas Curb Appeal Inc.

Read Full Post »

This home has all 4 sides decorated with warm white LED C9 bulbs. It also has red berry, “Razzleberry” LED mini lights on the shrubs and “Ice Drop”  tube lights on the tree, entry way and breezeway. It’s on the Highland Park carriage trail and it is a must see this holiday season.

DFW Christmas Lights and The Outdoor Lighting Expert are owned and operated by Dallas Curb Appeal Inc.

Read Full Post »

By Maria Bargelini of DFW Christmas Lights

When we hear the  term Christmas display or Holiday Lighting, some of us (who are old enough to remember) think of the Griswold’s. The infamous family in the National Lampoon’s vacation film series, “Christmas Vacation”. If the thought of 20+ foot ladders and touching electricity leaves you more than frazzled — consider having your Christmas Lights professional installed by DFW Christmas Lights. If you want to brave it on your own here are a few notes to help you out.

#1 Above all else—Be Safe!

At DFW Christmas Lights, we want you to have the holiday display you want–whether it be just a little or full out Griswold’s lights. The most important thing we want to remind you of is to be safe.

• Don’t skimp on things like cords, use the properly approved extension cords, timers, lights, etc., and always plug them into an electrical outlet protected by a ground fault circuit interrupter or GFCI. For more on GFCIs please click here.
• Remember that your lights will most likely get wet and will be exposed to the elements, so always use lights that are UL approved for indoor/outdoor use.
• If your lights trip a breaker or your GFCI, don’t just flip it back; reduce the load of that circuit by plugging some of your light strings into another outlet, and wait until you are sure that the devices are dry before you switch them back on.
• Ladder safety: You should never install Christmas Lights alone, especially if you are using a ladder that is more than 6′ tall. Make sure you have someone footing your ladder and watching out for your safety. It’s rare that you can open up your ladder on a level surface when you are in your landscape beds. Sometimes the ground in uneven, there are usually shrubs or plants in the way and there is a good chance that you may overextend yourself to reach things that your ladder can’t get you to.

#2 Buy the right lights in the right amount

With the exception of icicle lights, mini lights are almost never used on roofs as they simply don’t put off enough light.  For roof lines, windows, flower beds, pathways and any other architectural places I recommend using C7 or C9 bulbs with 12″ spacing. These are what you would normally see on houses. If you are buying sets from a retail store chances are the wire will be 25′ long and will have to be connected end to end. Here are a few notes on lights.

• Buy commercial grade if you can find it: Some of the box stores will have “commercial” sets available. Although these are typically inferior to what we would use in the industry it will be better than the lower quality sets.
• Read the directions: You can only connect the amount of sets together the manufacture specifies. They are not making a suggestions, you lights will not work properly if you do not follow the directions.
• Make sure your connections stay dry. Water and electricity do not mix. Be sure to cover any exposed electrical connections.
• Pay attention to wire size (gauge) and ampacity. The smaller the amount of copper the less footage you will be allowed to run.
• Consider LED lights. You can run up to 10x the amount of lights together and it’s more energy efficient.

For part II of this article please click here.

Please check out our archives and recent post for more information on Holiday Lighting.

DFW Christmas Lights and The Outdoor Lighting Expert are owned and operated by Dallas Curb Appeal Inc., a full service landscape contractor.

Read Full Post »

By Maria Bargellini of DFW Christmas Lights

Looking for a beautiful, hassle-free lighting display this holiday season? Here’s a few tips to help you out.

Decorating Your Christmas Tree

The most recognizable symbol of the holiday season is the family tree. Whether you call it a Christmas tree or a Holiday tree, decorating  it can be a challenge. Keeping that in mind, we suggests 3 simple tips to make your tree more beautiful―and your decorating easier―than it has ever been.

Tip #1: Keep replacements on hand

Some of us like to change it up every few years by simply switching things like the lighting. Such as clear bulbs on year 1, multi colored on year 2 and maybe all red in year 3. Whether you change them or not-when you find the perfect light sets for your tree, you want to make sure that you have replacements that match. Buy a set or two more than you need in case a string goes bad sometime over the holiday season. You can also wait until the Christmas season ends and get a few on sale as back ups or to change out colors in the future. Also make sure you keep all those little packages of replacement bulbs. Unfortunately you can not “borrowing” bulbs from another set as they may cause early burnouts and can be potentially dangerous. For more on replacing bulbs click here.

Tip #2: Test your lights first

Now I hate to admit this but I too have does this before (way way way in the beginning ). So you’ve decorated the entire tree and like any good Griswold you go to light it only to notice afterward that 1 or more light strings are dead. Now you have to go in search of the culprit. But no worries, this can very easily be avoided.  Simply roll out and plug in each set of lights in to make sure they work before hand. Test for burned out bulbs, partially dead strings, any flickering, fuses etc. You can use a tester to make it easier to find which bulbs are causing the problems. Save yourself the hassle and embarrassment of having to redecorate your tree again.  For more on how to maintain your lights click here.

Tip #3: Light your tree section by section

The decorating standard is to use a 100 light strand for every 1 foot of tree. Almost all pre lit 6′ trees will have 600 lights on them. Of course if you have a narrow tree or some form of Charlie Brown Tree you will need less lights. Don’t light the entire tree all at once. To make sure your tree is evenly lit, hang the lights section by section and make corrections as you go. You might also try following an “S” or “wave” pattern instead of simply “tornado wrapping” your tree.

Please search our archives for more articles on Holiday Lighting and samples of our work. DFW Christmas Lights and The Outdoor Lighting Expert are owned and operated by Dallas Curb Appeal Inc, a full service landscape contractor.

Read Full Post »

By Maria Bargellini of DFW Christmas Lights

So you have a great tree in the front and you want to light it this Christmas but you haven’t a clue as to what it cost or how to do it–No worries. This short article will help you figure out if your tree is a good canidate for lights, different lighting techniques and other details you ‘ll find interesting.

Large Lit Trees

Live Oaks, Red/White Oaks, Cedars, and many more types make for great lighted trees. These trees are usually around 15-20 feet tall and 12-20″ in diameter. They often have a large trunk,  low lying branches and enough electricity available for 60 set of lights.

Trunks: The larger the trunk the more lights will be needed to wrap around them. If the branches of your tree don’t start until 20 feet you will most likely end up with a lit trunk only.

Branches: Trees like Live Oaks have limbs that can extend up to 40 feet. Now you don’t have to go all the way to the ends for a good looking tree — but if you’re not hiring a professional Christmas Light installer do please

Ornamental Trees

These are typically 6-12 feet tall

You can light any tree with the right technique. The most striking trees are large trunked with low lying branches. If the tree has very high limbs it will take many lights to reach them. In most cases people just opt for a trunk wrap.

Read Full Post »